The solids control system is an essential component in drilling operations, designed to remove drilled solids and maintain drilling fluid properties. Understanding its technical specifications helps optimize performance and efficiency in oilfield operations.

A typical solids control system consists of multiple stages of separation equipment. The primary specifications include processing capacity (measured in gallons per minute or cubic meters per hour), separation efficiency (percentage of solids removed), and operating pressure range. Most systems handle flow rates between 500-2,000 GPM with 90-98% separation efficiency for particles larger than 74 microns.

The system's power requirements vary from 50-300 HP depending on configuration and capacity. Modern systems incorporate variable frequency drives (VFDs) for energy efficiency, with motor specifications typically ranging from 30-200 HP at 460V/60Hz or 380V/50Hz. The equipment operates within temperature ranges of -20°C to 50°C (-4°F to 122°F) for standard models, with special configurations available for extreme conditions.

Key components include shale shakers with screen sizes from API 20 to API 325, desanders and desilters with 8-12" hydrocyclones, and centrifuges with bowl speeds up to 3,500 RPM. Advanced systems feature automated controls with PLC systems, real-time monitoring sensors, and data logging capabilities. The structural framework typically uses high-grade carbon steel or stainless steel with protective coatings for corrosion resistance.

Installation dimensions vary by configuration, but standard skid-mounted units measure approximately 10-20m in length, 3-5m in width, and 3-4m in height. Weight ranges from 10-30 tons depending on equipment complement. Most manufacturers design systems to API 13C and ISO 13500 standards, with optional certifications including ATEX for hazardous environments.

If your project requires solids control equipment, choose Aipu Solids Control, we believe it will be your best choice.